Fabricators Archives - Page 3 of 13

Schüco A-opener – motorization of Schüco locks in multi-locking systems

The Schüco A-opener (automatic opener) is a significantly more secure access control option than e-opener technology.

This is a motorization of Schüco multi-locking systems (Schüco SafeMatic, Schüco Interlock and the new Schüco hook locks for the Schüco AD UP line). Unlike with the e-opener, power is supplied via the leaf.

Functions:

– Temporary release – this short-term unlocking of the door is activated by an electrical impulse at the unlocking input. The A-opener (motor) pulls the automatic latches back, acknowledging the opening with 2 signal tones, and then releases them after 2 seconds. The door locks automatically when closed again.

– Permanent release – constant closed contact at the unlocking input (permanent release e.g. via a timer switch) means the automatic latches remain withdrawn until the contact is opened again.

Special feature

The Schüco A-opener may only be used on smoke or fire doors if it is ensured that there is always enough power to run the automatic latches into the locking position even in the case of a power cut (e.g. using a disruption-free power supply or energy buffer).

If the Schüco A-opener is operated with buffer storage, the buffer storage must be replaced after 5 years.

It is fundamentally not permitted to operate a Schüco A-opener in “permanent release” on smoke or fire doors (!)

Schüco AF UDC 80 (Unitised Dynamic Construction) – unitised facade with sustainable greening

The Schüco AF UDC 80 Green Facade is part of the Cradle to Cradle certified system platform Schüco AF UDC 80 (aluminium unitised façade). The facade greening, which can be implemented specific to the property, offers a high degree of design diversity with different plants and system types. Schüco AF UDC 80 Green Facade has a sustainable positive effect on the environment and the quality of life in cities.

Vertical facade greening has been proven to reduce the inner-city temperature and the heat island effect. The facade greening as part of the Schüco AF UDC 80 facade produces vital oxygen, cleanses the air of pollutants and contributes to improving the urban climate. More green areas on facades beautify the cityscape and significantly increase the quality of life and stay in cities.

Greening the facade also pays off for buildings and their occupants and users: Buildings are protected from the elements such as wind, rain, hail and UV radiation. In addition, the plants efficiently increase heat and sound insulation and provide natural shading.

Special feature

The plants take root and grow in a fleece filled with planting substrate in the green element of the Schüco AF UDC 80 Green Facade.The material is classified as a Class A non-combustible building material for high safety requirements.Other products:Schüco AF UDC 80 frame constructionSchüco AF UDC 80 CV (Concealed Vent) completely concealed sashesSchüco AF UDC 80 SG (Structural Glazing)

Schüco AF 500 ECO – the intelligent combination of cutting and machining.

With its 6-sided machining capability, the Schüco MFM AF 500 ECO is a highly efficient machine tool which brings together cutting and machining. The Schüco AF 500 ECO has been specially developed for machining window, door, facade, sliding and special profiles in aluminium.
The comprehensive machining capability makes virtually any metal processing task straightforward.
The safeguarding of the machine with bumpers allows easy and ergonomic loading and unloading without additional safety devices such as safety fences, step protection mats etc. This allows the greatest possible degree of flexibility.
Schüco AF 500 ECO has a Predictive Maintenance Function. Thanks to integrated vibration measurement, diagnostics are available at all times for all important elements of the machine, especially worn tools.
The SchüCam control software uses the SchüCal|JaniSOFT software data 1:1 and thus significantly reduces the time required for the preparation and manufacture of profiles.

Special features

Schüco AF 500 ECO works based on an innovative environmental concept. Thanks to energy recovery, the machine is particularly sustainable in operation. Its reduced energy requirement and the time savings resulting from combined cutting and machining in a single machine create economic advantages in manufacturing.

Schüco AB ZDS in UDC 80 (Aliminium Blind ZIP Design Screen) – External, fully integrated textile solar shading with high wind stability

Schüco AB ZDS is a textile solar shading system that can be fully integrated into the Schüco UDC 80 unitised façade.

Schüco AB ZDS is the perfect solar shading solution for use in upmarket residential and commercial buildings. The Zip technology ensures a smooth fabric appearance and focuses on a slim and modern design through façade integration. Thanks to the integration of the external sun protection, the view of the building envelope remains unaffected. When extended, the Schüco AB ZDS system forms an opaque area that sets visual accents depending on the choice of fabric and colour.

Depending on the selected textile and fabric opening factor (0 to 14 %), the system meets all the requirements of modern sun protection: from opaque fabric with excellent glare and privacy protection properties to highly transparent textiles that ensure optimum external coverage.

Schüco AB ZDS has a very high resistance to weathering, withstanding wind speeds of 25 metres per second without any problems.

Special feature

The external Schüco AB ZDS solar shading system in UDC 80 blocks solar radiation before it hits the façade and enters the interior. Exterior solar shading systems are always more effective than interior systems and are the best possible solution against overheating of the building interior.

The Schüco AB ZDS solar shading system is supplied pre-assembled, ready for installation and already wound up in a closed blind box.

Schüco AB ZDS in AWS (Aliminium Blind ZIP Design Screen) – External, fully integrated textile solar shading with high wind stability

Schüco AB ZDS is a textile solar shading system that can be fully integrated into Schüco AWS window systems.

Schüco AB ZDS is the perfect solar shading solution for use in upmarket residential and commercial buildings. Zip technology ensures smooth fabric appearance and focuses on a slim and modern design in the guide rail area. Thanks to the integration of the external sun protection, the view of the building envelope remains unaffected. When extended, the Schüco AB ZDS system forms an opaque area that sets visual accents depending on the choice of fabric and colour.

Schüco AB ZDS has a very high resistance to weathering, withstanding wind speeds of 25 metres per second without any problems.

Special feature

The external Schüco AB ZDS solar shading system in AWS blocks solar radiation before it hits the window and enters the room. Exterior solar shading systems are always more effective than interior systems and are the best possible solution against overheating of the building interior.

The Schüco AB ZDS solar shading system is supplied pre-assembled, ready for installation and already wound up in a closed blind box.

Schüco AD UP 75 with barrier-free zero threshold – For today. For tomorrow. For buildings with a future.

Schüco AD UP with the barrier-free zero threshold creates an absolutely floor-level threshold solution of 0.0 mm.

The Schüco AD UP door system complies with the barrier-free standards of various countries: e.g. German DIN 18040 (barrier-free building), Austrian ON B1600.

The barrier-free zero threshold enables unrestricted, threshold-free access into buildings.

The Schüco AD UP barrier-free threshold achieves the highest class 6 of the ift guideline “Determination of the classification of the roll-over capacity of thresholds (BA-01/1)”.

With the Schüco AD UP barrier-free solution, all classic requirements for a door, such as driving rain tightness or air permeability, can still be implemented at the highest level.

The additional installation of automatic swing door operators also allows doors to open as if by themselves, which enables easy building access for people with motor disabilities.

Special features

The following door systems can be made barrier-free:

Schüco AD UP 75

Schüco AD UP 75 BL

Schüco door ADS 65 HD Generation 2 for large-format doors with high durability, good sealing and thermal insulation

Schüco ADS 65 HD Gen2 is a thermally-insulated and robust aluminium door. Schüco ADS 65 HD permits high loads and is suitable for commercial and residential areas. The system was developed for projects where high-performance single doors are required.

Schüco ADS 65 HD has a strong design and allows large opening widths. The system can be integrate within building automation systems, for example with integral Schüco DCS access control.

The new series is an extension of the Schüco ADS 65 HD with the following additions:

– New central seal system for tougher sealing and thermal insulation requirements

– Zero threshold for accessible building access and convenience for inward- and outward-opening doors

Special feature

Design versions:

– 1-leaf outward-opening with zero threshold and inward-opening with stop and zero threshold (phase 1 from autumn 2021)

– 2-leaf, panic version with zero threshold or standard threshold inward/outward opening, Schüco AWS connection (phase 2 from spring 2022)

Same tools for Schüco ADS 65 HD Gen2 as for Schüco ADS 65 HD.

The system design is based on the proven VISS system. This system is suitable for vertical façades with large span widths. The shape and material of the support structure can be freely selected. The system provides a wide range of structural diversity through variable support structures: IPE beams, steel hollow sections, stainless steel base profiles. The VISS Basic System is convincing with great design freedom thanks to numerous possibilities of combinations with all VISS standard façades.

In sloped glazing, welded steel structures play out their full strength. Thus, even large skylights can be implemented with elegant profiles. The TVS gasket principle is optimized to the specific application in roof glazing, but it can also be easily combined with the VISS vertical façades. Thus, the supporting structure can also be led from the slope into the vertical.

Based on the proven VISS system solution, with VISS SG a high-tech façade in structural glazing design can be implemented efficiently and easily. Glass surfaces up to 2.5 x 5.0 m visibly increase the transparency of the building envelope. Variable glass anchors allow the installation of double or triple insulating glass up to 70 mm unit thickness. Even roof glazing in structural glazing design can be easily implemented with VISS SG. The Jansen VISS SG system can be combined with all VISS profiles of face widths 50 and 60 mm and with the support independent VISS Basic solution.

Privacy settings

With the slider, you can enable or disable different types of cookies:

This website will:

This website won't:

This website will:

This website won't:

This website will:

This website won't:

This website will:

This website won't: