Based on the Schüco LivIng system dimensions, using patented aluminium profile rolling technology turns Schüco LivIng Alu Inside into a steel-free profile with maximum thermal insulation alongside a high level of cost-effectiveness and flexibility in fabrication and installation.
Schüco LivIng Alu Inside is the next logical development of the Schüco Alu Inside system. It is based on patented aluminium profile rolling technology, whereby continuous aluminium strips are simultaneously extruded into PVC-U profiles. They provide the entire construction with a level of stability which almost rivals that of steel-reinforced profiles. With this highly thermally insulated PVC-U system, steel-free windows which are suitable for passive houses can be produced economically on an industrial scale.
Thanks to its 7-chamber profile construction, the dispensation with steel reinforcement and the targeted positioning of the aluminium hinges, Schüco LivIng Alu Inside has no thermal bridging. Here, the material within the profile system – a high-quality aluminium alloy – is a distinct advantage because it reflects approx. Because it reflects approx. 90% of the thermal radiation due to its polished surface. The optimum division of the chambers, the reduction of the rebate space and additional, large insulation zones to accommodate optional insulation blocks allow insulation values to be achieved.
Schüco LivIng – the new generation for pioneering PVC-U doors
Twin system = One system with two versions (AS/MD)
The Schüco LivIng PVC-U system is an innovative 7-chamber system that can be constructed as a twin system with both a rebate gasket and a centre gasket. In conjunction with the centre gasket, the system achieves passive house standard in accordance with ift Rosenheim. As a system with a rebate gasket, excellent thermal insulation properties and narrow face widths are also achieved.
The first weld-on gasket is integrated in the Schüco LivIng window system. Using elastic, weld-on material increases the sealing effect in the difficult corner area of the unit, whilst also allowing for a closed, visually appealing corner design without hard gasket corners. The durable, eco-friendly material keeps a tight seal throughout its entire service life.
White profiles are supplied with modern, silver-grey gaskets, foiled profiles are available with black gaskets.
Profiles can be coloured with a large selection of single colour and woodgrain decorative foils, Schüco AutomotiveFinish and Schüco TopAlu.
The PVC-U system Schüco CT 70 AS with rebate gasket is based on a 5-chamber technology. Excellent thermal insulation properties and narrow face widths in three different vent contours are the distinctive features of this system.
Schüco CT 70 AS window systems are suitable for a wide variety of uses in both new-build and renovation projects. An extensive range of accessories ensures a high level of system security.
The two drainage levels guarantee an optimum protection aginst wind, rain and noise.
Silver-grey gaskets on white profiles for discreet appearance
White Schüco CT 70 PVC-U profiles are delivered with modern, silver-grey gaskets for a discreet appearance. Foiled profiles are equipped with black gaskets.
Profiles can be coloured with a large selection of single colour and woodgrain decorative foils, Schüco AutomotiveFinish and Schüco TopAlu.
The Schüco AWS 90.SI+ (Super Insulation) window system perfectly meets structural requirements while offering the greatest possible design freedom – including optimised thermal insulation and passive house certification.
As part of the Schüco AWS modular system for the 90 mm basic depth, the aluminium window offers a high level of flexibility for implementing attractive design solutions in building envelopes. Depending on architectural requirements, it can be configured as a punched opening, ribbon window or insert units in Schüco façades as well as in combination with Schüco door systems.
The wide range of opening types includes designs such as side-hung, turn/tilt and tilt/slide vents as well as barrier-free opening and double-vent units.
A further benefit for specifiers and architects is the wide range of profiles within the system platform, including corner mullions, structural mullions, symmetrical and asymmetrical mullions, as well as additional combination options, such as with Schüco sun shading and ventilation systems.
The window system with maximum thermal insulation thereby sets standards in terms of planning and design flexibility for the construction of energy-efficient, stylish building envelopes.
- Schüco AWS 90 BS.SI+ (Block System Super Insulation) : Block window with maximum thermal insulation and concealed vent for sophisticated designs
- The Schüco AWS 90 VV.SI+ (Ventilation Vent Super Insulation) window system with maximum thermal insulation is available as an opaque side-hung vent with ventilation function in different face widths – with excellent weathertightness and sound reduction values even in extreme weather conditions thanks to the split insulating bar.
- Schüco Window AWS 90.SI+ Green passive house certification by optimized thermal insulation with Uf ≤ 0.7 W/(m²K)
Alongside energy efficiency, the seamless integration of form and function is nowadays a fundamental requirement when creating modern building envelopes. With the Schüco AWS 75 PD.SI (Panorama Design Super Insulation) window, Schüco now offers an opening unit that meets these architectural requirements perfectly, with minimal internal and external face widths and excellent thermal insulation.
System features which are perfectly tailored to one another serve as the basis for this. These include a flush-fitted vent profile appearance on the inside, minimal gasket sightlines, maximum transparency with the narrowest of internal and external face widths, as well as harmonised face widths in the fixed light and opening unit for a uniform frame appearance. Concealed drainage and a clean language of design thanks to narrow profile radii complete the pioneering design window system.
Integration of the highly thermally insulated opening unit in the Schüco FWS 35 PD façade system as well as the combination with the narrow, opaque Schüco AWS 75 PD VV.SI (Ventilation Vent Super Insulation) ventilation vent, for example, provide a perfectly tailored architectural solution.
As part of the Schüco AWS system platform, Schüco AWS 70.HI (High Insulation) offers an attractive range of solutions with outstanding thermal insulation for the 70 mm basic depth.
It is based on the functional, energy-efficiency and design properties of the aluminium construction: perfectly tailored components combine benefits such as excellent thermal insulation values, narrow face widths and concealed, standard manual or electromechanical fittings for inward and outward-opening windows.
The high level of flexibility of the system enables a variety of uses to meet a range of different building envelope requirements: as a punched opening, ribbon window or façade insert unit, as well as in combination with Schüco door systems.
An additional benefit for architects and specifiers is the wide range of opening types such as crank-operated turn/tilt vents, bottom-hung toplights or barrier-free window doors.
A wide range of profiles is available within the system platform, including corner mullions, structural mullions, symmetrical and asymmetrical mullions, as well as a number of design variations and additional combination options, such as with Schüco sun shading and ventilation systems.
Schüco AWS 70.HI thereby sets standards in terms of planning flexibility and offers attractive window solutions for ambitious, energy-efficient building envelopes.
Schüco AWS 70. HI thereby sets standards in terms of planning flexibility and offers attractive window solutions for ambitious architecture.
- With outstanding thermal insulation values and a slimline design without visible vent contours, Schüco AWS 70 BS.HI (Block System High Insulation) meets the highest energy-efficiency and architectural requirements with the greatest possible transparency.
- As an opaque side-hung vent with ventilation function, the Schüco AWS 70 VV.HI (Ventilation Vent High Insulation) window system with excellent insulation is available in different face widths – with excellent weathertightness and sound reduction values even in extreme weather conditions thanks to the split insulating bar.
- With its beveled outer contours, the Schüco AWS 70 RL.HI (Residential Line High Insulation) is best suited to renovation projects or for visual emphasis.
- The Schüco AWS 70 WF.HI (Window Façade High Insulation) aluminium window façade meets the highest energy-efficiency and architectural requirements thanks to its outstanding thermal insulation and narrow external face widths.
- The Schüco AWS 70 ST.HI (Steel Contour High Insulation) Serie is designed with angled outer contours in the look of antique steel windows.
As part of the Schüco AWS system platform, the thermally insulated window system offers an extensive range of solutions for the 65 mm basic depth to meet a variety of building envelope requirements.
It is based on the functional, energy-efficiency and design properties of the aluminium construction: perfectly tailored components combine benefits such as good thermal insulation, narrow face widths and concealed, standard manual or electromechanical fittings for inward and outward-opening windows.
The high level of flexibility of the system enables a wide variety of uses as a punched opening, ribbon window or façade insert unit, as well as in combination with Schüco door systems.
An additional benefit for architects and specifiers is the wide range of opening types such as side-hung and turn/tilt vents, bottom-hung toplights or barrier-free window doors.
An outward-opening window design with centre gasket is also available as a double-vent window with burglar resistance in accordance with test procedure PAS 24.
A wide range of profiles is available within the system platform, including corner mullions, structural mullions, symmetrical and asymmetrical mullions, as well as a number of design variations and additional combination options, such as with Schüco sun shading and ventilation systems.
Schüco AWS 65 thereby sets standards in terms of planning flexibility and offers attractive window solutions for ambitious architecture.
- The Schüco AWS 65 VV (Ventilation Vent) window system is available as an opaque side-hung vent with ventilation function in different face widths – with excellent weathertightness and sound reduction values even in extreme weather conditions thanks to the split insulating bar.
- The Schüco AWS 65 RL is suitable for economical solutions in conjunction with excellent thermal insulation. With its beveled outer contours, the Schüco AWS 65 RL (Residential Line) is best suited to renovation projects or for visual emphasis.
- As a block window Schüco Window AWS 65 BS meets high architectural demands by a sleek design with maximum transparency.
- The Schüco AWS 65 WF (Window Façade) aluminium window façade meets the highest energy-efficiency and architectural requirements thanks to its outstanding thermal insulation and narrow external face widths.
Thermally insulated steel profile system for flush-fitted door designs
The thermally insulated Janisol steel profile system (basic depth 60 mm) is highly suitable for constructing attractive and sophisticated single and double-leaf doors, both inside and outside – also with side components and toplights.
The system compatibility of the Janisol door series means that different security requirements can be met easily with a uniform solution: Janisol doors look almost identical to Jansen Economy doors (R30/RS/burglar-resistant) and the Janisol fire door series
Pioneering, high-performance door system for residential and commercial buildings
Designed for the most demanding project-specific solutions in residential and commercial construction: the highly stable Schüco AD UP 90 door system with a 90 mm basic depth is based on a triple-shell construction principle and uses a double central gasket system that ensures the best energy efficiency, insulation and weathertightness properties.
The system guarantees maximum design and planning freedom in implementing functional, comfort and design oriented door solutions for all areas of application, e.g. as a front entrance with leaf-enclosing infills, concealed door hinges and concealed, integrated door communication systems.
- The Schüco AD UP 90.SI door system is the design option with the best thermal insulation. With an identical profile construction and modular foam inserts, the pioneering door system achieves excellent thermal insulation values up to passive house standard.
- System enhancement of the Schüco Universal Platform, the new Schüco AD UP 90 Residential door series offers innovative, mechanical, adhesive-free infill fixing for mounted infills on one side or both sides without additional fixing profiles. The system development enables fast and efficient fabrication of front doors and entrance doors for luxury homes.
Universal use as heavily used commercial door and stylish entrance door
Excellent insulation properties combined with high stability – the Schüco AD UP 75 door system with a 75 mm basic depth offers high functional reliability for all requirements in luxury residential and commercial buildings.
With its groundbreaking construction principle and modular gasket system, the system sets new standards in thermal insulation, weathertightness, load-bearing capacity and durability for aluminium door systems. With a broad portfolio of fittings and design options, it allows stylish door solutions which meet every requirement for all areas of life and work. The door system is perfect for integration with door communication and access control systems.
- The Schüco AD UP 75 BL (Basic Line) door system is the basic option of the Schüco AD UP system platform for 75 mm basic depth.
- System enhancement of the Schüco Universal Platform, the new Schüco AD UP 75 BL Residential door series offers innovative, mechanical, adhesive-free infill fixing for mounted infills on one side or both sides without additional fixing profiles. The system development enables fast and efficient fabrication of front doors and entrance doors for luxury homes.
